– EPSD100254271: SWSMI communication buffer not been checked before consumption – EPSD100254944: Fail to boot from DOS bootable USB key after hot plugging Zepher with payload – NOTICE: ROM update method: Need use DediProg programmer to flash SPI chip.Please load ROM file(RB_.ROM) from release package.
Updated again the FRUSDR using the "FRUSDR.– NOTICE: Capsule update method: If previous BIOS version is R and earlier version, need use HSW/HSW-R CPU part boot to EFI shell, and use capsule files update BIOS to R and update ME to 3.0.7.24,then replace with BDW CPU part to power on. At the Sensor Readings of the BMC console it reports: BMC FW Health sensor has failed and may not be providing a valid reading Warning 0x0010 The actual readings from the BMC console now are:Īfter the update the FANs are operating in full speed, ~8200RPM, and the server is extremely noisy. System BIOS - ME Firmware - 02.01.07.328 - BMC Firmware - FRUSDR - 1.11 This update package includes the following system software updates: I recently updated the BIOS to the latest, BMC6580, and the update was successful Intel Server P4308CMHEN with the S2600CP.īoard Information: Product Name : S2600CP | Serial Number: QSCP35000469 | Part/Model Number : E99552-510 | FRU File ID : FRU Ver 1.00 Updated again the FRUSDR using the "FRUSDR.nsh" command and it was successful Shutdown the server, remove both power cords for 30 seconds and the power on
0 kommentar(er)
